Tag Archives: gear reducer box

China 1 years warranty NMRV30 5-80 ratio 0.06-0.18kw gear box speed gearbox reducer worm gearbox calculation

Error:获取返回内容失败，
Your session has expired. Please reauthenticate.

worm reducer

What is a worm gear reducer gearbox?

A worm gear reducer gearbox is a mechanical device that uses a worm gear and a worm to reduce the speed of a rotating shaft. The gear reducer gearbox can increase the output torque of the engine according to the gear ratio. This type of gear reducer gearbox is characterized by its flexibility and compact size. It also increases the strength and efficiency of the drive.

Hollow shaft worm gear reducer gearbox

The hollow shaft worm gear reducer gearbox is an additional output shaft connecting various motors and other gearboxes. They can be installed horizontally or vertically. Depending on size and scale, they can be used with gearboxes from 4GN to 5GX.
Worm gear reducer gearboxes are usually used in combination with helical gear reducer gearboxes. The latter is mounted on the input side of the worm gear reducer gearbox and is a great way to reduce the speed of high output motors. The gear reducer gearbox has high efficiency, low speed operation, low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes are made of hard steel or non-ferrous metals, increasing their efficiency. However, gears are not indestructible, and failure to keep running can cause the gear oil to rust or emulsify. This is due to moisture condensation that occurs during the operation and shutdown of the reducer gearbox. The assembly process and quality of the bearing are important factors to prevent condensation.
Hollow shaft worm gear reducer gearboxes can be used in a variety of applications. They are commonly used in machine tools, variable speed drives and automotive applications. However, they are not suitable for continuous operation. If you plan to use a hollow shaft worm gear reducer gearbox, be sure to choose the correct one according to your requirements.

Double throat worm gear

Worm gear reducer gearboxes use a worm gear as the input gear. An electric motor or sprocket drives the worm, which is supported by anti-friction roller bearings. Worm gears are prone to wear due to the high friction in the gear teeth. This leads to corrosion of the confinement surfaces of the gears.
The pitch diameter and working depth of the worm gear are important. The pitch circle diameter is the diameter of the imaginary circle in which the worm and the gear mesh. Working depth is the maximum amount of worm thread that extends into the backlash. Throat diameter is the diameter of the circle at the lowest point of the worm gear face.
When the friction angle between the worm and the gear exceeds the lead angle of the worm, the worm gear is self-locking. This feature is useful for lifting equipment, but may be detrimental to systems that require reverse sensitivity. In these systems, the self-locking ability of the gears is a key limitation.
The double throat worm gear provides the tightest connection between the worm and the gear. The worm gear must be installed correctly to ensure maximum efficiency. One way to install the worm gear assembly is through a keyway. The keyway prevents the shaft from rotating, which is critical for transmitting torque. Then attach the gear to the hub using the set screw.
The axial and circumferential pitch of the worm gear should match the pitch diameter of the larger gear. Single-throat worm gears are single-threaded, and double-throat worm gears are double-throat. A single thread design advances one tooth, while a double thread design advances two teeth. The number of threads should match the number of mating gears.
worm reducer

Self-locking function

One of the most prominent features of a worm reducer gearbox is its self-locking function, which prevents the input and output shafts from being interchanged. The self-locking function is ideal for industrial applications where large gear reduction ratios are required without enlarging the gear box.
The self-locking function of a worm reducer gearbox can be achieved by choosing the right type of worm gear. However, it should be noted that this feature is not available in all types of worm gear reducer gearboxes. Worm gears are self-locking only when a specific speed ratio is reached. When the speed ratio is too small, the self-locking function will not work effectively.
Self-locking status of a worm reducer gearbox is determined by the lead, pressure, and coefficient of friction. In the early twentieth century, cars had a tendency to pull the steering toward the side with a flat tire. A worm drive reduced this tendency by reducing frictional forces and transmitting steering force to the wheel, which aids in steering and reduces wear and tear.
A self-locking worm reducer gearbox is a simple-machine with low mechanical efficiency. It is self-locking when the work at one end is greater than the work at the other. If the mechanical efficiency of a worm reducer gearbox is less than 50%, the friction will result in losses. In addition, the self-locking function is not applicable when the drive is reversed. This characteristic makes self-locking worm gears ideal for hoisting and lowering applications.
Another feature of a worm reducer gearbox is its ability to reduce axially. Worm gears can be double-lead or single-lead, and it is possible to adjust their backlash to compensate for tooth wear.

Heat generated by worm gears

Worm gears generate considerable amounts of heat. It is essential to reduce this heat to improve the performance of the gears. This heat can be mitigated by designing the worms with smoother surfaces. In general, the speed at which worm gears mesh should be in the range of 20 to 24 rms.
There are many approaches for calculating worm gear efficiency. However, no other approach uses an automatic approach to building the thermal network. The other methods either abstractly investigate the gearbox as an isothermal system or build the TNM statically. This paper describes a new method for automatically calculating heat balance and efficiency for worm gears.
Heat generated by worm gears is a significant source of power loss. Worm gears are typically characterized by high sliding speeds in their tooth contacts, which causes high frictional heat and increased thermal stresses. As a result, accurate calculations are necessary to ensure optimal operation. In order to determine the efficiency of a gearbox system, manufacturers often use the simulation program WTplus to calculate heat loss and efficiency. The heat balance calculation is achieved by adding the no-load and load-dependent power losses of the gearbox.
Worm gears require a special type of lubricant. A synthetic oil that is non-magnetic and has a low friction coefficient is used. However, the oil is only one of the options for lubricating worm gears. In order to extend the life of worm gears, you should also consider adding a natural additive to the lubricant.
Worm gears can have a very high reduction ratio. They can achieve massive reductions with little effort, compared to conventional gearsets which require multiple reductions. Worm gears also have fewer moving parts and places for failure than conventional gears. One disadvantage of worm gears is that they are not reversible, which limits their efficiency.
worm reducer

Size of worm gear reducer gearbox

Worm gear reducer gearboxes can be used to decrease the speed of a rotating shaft. They are usually designed with two shafts at right angles. The worm wheel acts as both the pinion and rack. The central cross section forms the boundary between the advancing and receding sides of the worm gear.
The output gear of a worm gear reducer gearbox has a small diameter compared to the input gear. This allows for low-speed operation while producing a high-torque output. This makes worm gear reducer gearboxes great for space-saving applications. They also have low initial costs.
Worm gear reducer gearboxes are one of the most popular types of speed reducer gearboxes. They can be small and powerful and are often used in power transmission systems. These units can be used in elevators, conveyor belts, security gates, and medical equipment. Worm gearing is often found in small and large sized machines.
Worm gears can also be adjusted. A dual-lead worm gear has a different lead on the left and right tooth surfaces. This allows for axial movement of the worm and can also be adjusted to reduce backlash. A backlash adjustment may be necessary as the worm wears down. In some cases, this backlash can be adjusted by adjusting the center distance between the worm gear.
The size of worm gear reducer gearbox depends on its function. For example, if the worm gear is used to reduce the speed of an automobile, it should be a model that can be installed in a small car.

China 1 years warranty NMRV30 5-80 ratio 0.06-0.18kw gear box speed gearbox reducer worm gearbox calculation
editor by Cx 2023-06-20

China high quality Helical Gear Reducer Motor Parallel Shaft Reducer Gearbox worm gear box elecon

Product Description

Product Description

-F Series Parallel Shaft Helical gearbox

Product Features

1. Modular design, compact structure. Extra-slim parallel shaft helical gearmotors are the perfect solution when space is limited
2. F series parallel shaft helical gearmotors are typically used in conveyors and materials processing applications
3. Multi-stage (2 or 3 stages) gear units for low output speed
4. Hollow output shaft with keyed connection, shrink disk, splined hollow shaft, or torque arm
5. Can be combined with other types of gearboxes (Such as R Series, UDL Series)
6. Optional mounting options (foot-mounted, flange-mounted, shaft-mounted)

Product Parameters

Models	Output Shaft Dia.		Input Shaft Dia.	Power(kW)	Ratio	Max. Torque(Nm)
Models	Solid Shaft	Hollow Shaft	Input Shaft Dia.	Power(kW)	Ratio	Max. Torque(Nm)
F38	25mm	30mm	16mm	0.18~3.0	3.81~128.51	200
F48	30mm	35mm	16mm	0.18~3.0	5.06~189.39	400
F58	35mm	40mm	19mm	0.18~5.5	5.18~199.70	600
F68	40mm	40mm	19mm	0.18~5.5	4.21~228.99	820
F78	50mm	50mm	24mm	0.37~11	4.30~281.71	1500
F88	60mm	60mm	28mm	0.75~22	4.20~271.92	3000
F98	70mm	70mm	38mm	1.1~30	4.68~276.64	4300
F108	90mm	90mm	42mm	2.2~45	6.20~255.25	7840
F128	110mm	100mm	55mm	7.5~90	4.63~172.33	12000
F158	120mm	120mm	70mm	11~200	12.07~270.18	18000

Materials Data Sheet

Housing material	Grey Cast iron
Housing hardness	HBS163~255
Gear material	20CrMnTi alloy steel
Surface hardness of gears	HRC58°~62 °
Gear core hardness	HRC33~48
Input / Output shaft material	40Cr alloy steel
Input / Output shaft hardness	HRC32~36
Machining precision of gears	accurate grinding, 6~5 Grade
Lubricating oil	GB L-CKC220-460, Shell Omala220-460
Heat treatment	tempering, cementiting, quenching, normalizing, etc.
Efficiency	94%~96% (depends on the transmission stage)
Noise (MAX)	60~68dB
Temp. rise (MAX)	40°C
Temp. rise (Oil)(MAX)	50°C
Vibration	≤20µm
Backlash	≤20Arcmin
Brand of bearings	China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal	NAK — ZheJiang or other brands requested

Detailed Photos

Our process of production

Our product line

Company Profile

Company Profile

Bode was founded in 2007, which is located in HangZhou city, ZHangZhoug province. As 1 professional manufacturer and exporter, we have more than 17 years’ experience in R & D of worm reducer, gear reducer, gearbox , AC motor and relative spare parts. We have factory with advanced production and test equipment, the strong development of team and producing capacity offer our customers with high quality products. Our products widely served to various industries of Metallurgy, Chemicals, lifting, mining, Petroleum, textile, medicine, wooden etc. Main markets: China, Africa, Australia, Vietnam, Turkey, Japan, Korea, Philippines… Welcome to ask us any questions, good offer always for you for long term business.

FAQ

Q1: Are you trading company or manufacturer?
A: We are factory.

Q2: What kinds of gearbox can you produce for us?
A: Main products of our company: R, S, K, F series helical-tooth reducer, RV series worm gear reducer,H Series Parallel Shaft Helical Reduction Gear Box

Q3: Can you make as per custom drawing?
A: Yes, we offer customized service for customers.

Q4: Can we buy 1 pc of each item for quality testing?
A: Yes, we are glad to accept trial order for quality testing.

Q5: What information shall we give before placing a purchase order?
A: a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.

Q6: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock.

Q7: What is your terms of payment ?
A: 30% Advance payment by T/T after signing the contract.70% before delivery

Dear customers, If you are interested in our product, welcome to contact with us.
Our team will do our best to meet your need 🙂

Application:	Machinery, Marine, Agricultural Machinery
Function:	Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout:	Coaxial
Hardness:	Hardened Tooth Surface
Installation:	Vertical Type
Step:	Single-Step

Samples:	US$ 50/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \|

worm reducer

What is a worm gear reducer gearbox?

The worm gear reducer gearbox is used to change the output speed of the mechanical device. It consists of worm and helical gears mounted on the input side of the equipment. In some cases, this gear reduction system can be multi-stage, enabling extremely low output speeds. It has the advantages of low energy consumption and low vibration.
Hollow shaft worm gear reducer gearbox

Worm gear reducer gearbox is an effective device to reduce the speed of mechanical equipment. The use of hard steel or non-ferrous metals for the worm increases its efficiency. Worms made of hard steel generate more heat than worms made of mild steel. Different thermal expansion results in gaps between mating surfaces. Despite its many benefits, worm gear reducer gearboxes are prone to oil leakage, which can be a problem for a number of reasons.
Hollow shaft worm gear reducer gearboxes are available in different gear ratios and are compatible with many motor types. Some are available in dual-axis and single-axis configurations and can be mounted horizontally or vertically. They are also available in intermediate ratios, as well as four- and five-speed transmission types. They can also be connected with additional output shafts.
Another type of worm gear reducer gearbox is the multi-stage variety. This gear reducer gearbox has multiple stages, enabling it to reduce speed with extremely low output speeds. In addition to the large transmission ratio, the multi-stage gear reducer gearbox has low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes offer space-saving solutions as well as increased torque. Agknx Gearbox offers worm gear reducer gearboxes that solve common deceleration problems. The company has also expanded its product range into the bathroom market. Compared with the standard gearbox, the worm gear reducer gearbox has the characteristics of lower price and better torque output.
Agknx worm gear

The Agknx type worm gear reducer gearbox has multi-tooth line contact and is widely used in heavy machinery. These gears are characterized by a high load-carrying capacity, but they are highly sensitive to misalignment and manufacturing errors. However, by employing point contact, these gears can be made more reliable and can withstand higher loads.
Another major advantage of the Agknx worm gear is its high load capacity. The tooth profile design of the gears has a high relative slip ratio, which improves efficiency and load capacity. In addition, the large angle between the sliding direction and the contact line provides a low coefficient of friction. The Agknx worm gear also features premium carburized steel and phosphor bronze castings for exceptional durability. In addition, the tooth profile is very precise, the operation is quiet, and the speed fluctuation is small.
Agknx worm gear reducer gearboxes are designed to operate for up to ten hours per day with an even load. The design of this worm gear reducer gearbox stems from Sumitomo Heavy Industries’ extensive experience in gear reducer gearboxes. The smooth surface texture and precise tooth profile of the gears ensure that the gears can withstand high loads without damaging the lubricant film. In addition, Agknx worm shafts are specially designed to have the right stiffness.
Agknx worm gear reducer gearboxes are designed to maximize load capacity while minimizing energy consumption. Its fully meshed teeth reduce surface pressure on the worm gear teeth and increase load capacity.
worm reducer Double throat worm gear

There are a few things to consider when choosing a dual-throat worm gear. First, the diameter of the root circle must match the circle pitch of the larger gear. This measurement is usually done by measuring the distance between adjacent teeth. Alternatively, the worm’s normal module can be used. It is the value entered in the worm module dialog. In addition, the axial pitch of the worm should be equal to the pitch diameter of the circular pitch.
Double-throat worm gears are an excellent choice for heavy and heavy-duty applications. The design of this worm gear is ideal for heavy-duty applications as it provides a tighter connection between the worm and the gear. It is also more compact than other types of gear and is comparable to a fine-pitch lead screw.
The efficiency of a double-throat worm gear depends on the material of the gear and worm. Typically, gears are made of case-hardened steel, while worm gears are made of bronze or cast iron. In some cases, a combination of cast iron and bronze can be used.
The deflection of the worm shaft is also affected by the tooth parameters. Tooth height, pressure angle, and size factors all affect the deflection of the worm shaft. In addition, the number of worm threads is another important parameter that affects the deflection of the worm shaft.
Double-throat worm gears are commonly used in industrial applications where high drive reduction is required. The worm has a concave and internal tooth structure that can be adjusted to achieve various ratios. Worm gears and worm gear assemblies must be properly mounted on their shafts to prevent back drive.
Brass worm gear

The basic working principle of the brass worm gear reducer gearbox is the same as that of the traditional worm gear reducer gearbox. Its axial pitch must be equal to the circumferential pitch of the larger gear. The single-thread design advances one tooth per revolution, while the double-thread design advances two teeth. The threads on the worm are either left-handed or right-handed. The lead of a worm is the distance a point on the thread of the worm moves in one revolution. The lead angle is the angle tangent to the pitch of the cylinder and the axis of the worm.
Double-thread worm gear reducer gearboxes are best for heavy loads. It provides the tightest connection between the worm and the gear. Assembly of the worm gear requires precise mounting. The keyway installation method involves drilling a square cut in the gear hole. This prevents the worm from rotating on the shaft and helps transmit torque. Then use the set screw to secure the gear to the hub.
The large fuel tank helps keep the worm gear clean and reduces heat. It also provides lubrication for extended life. Worm gear reducer gearboxes with oil reservoirs provide a lubricated environment and low-friction surfaces. Additionally, it offers multi-position installation flexibility. Additionally, its housing is cross-milled for precise alignment. It also features internal baffles for leak-free ventilation.
I260 series worm gear reducer gearboxes are one-piece iron casings with solid or hollow output shafts and tapered roller bearings. This gear reducer gearbox is designed for low to medium-horsepower applications. This gear reducer gearbox is a cost-effective option with low initial cost, the high gear ratio, and high torque in a compact package. Also, it is more shock resistant than other gear reducer gearboxes.
worm reducer Brass worm gear

Brass worm gear reducer gearbox is a reduction gear. This type of gear can provide a lot of reduction in a small package. This type of gear reducer gearbox also has the ability to generate high torque. However, it is important to understand that this gear reducer gearbox has thermal limitations, which reduce its efficiency. The choice of lubricant for this gear reducer gearbox is very flexible. However, being a yellow metal, it is important to remember that the lubricant must be non-reactive.
Worm gears are used in many consumer and industrial applications and have high reduction ratios. These gears are produced in various configurations and sizes. Worm gears are similar to spur gears but have non-parallel shafts. Worm gears are also suitable for applications requiring low output speed but high torque.
Worm gears have some distinct advantages over other gears. First, unlike standard gears, the worm rotates in a worm-like motion. This mechanism prevents reverse movement. This is because the lead angle of the worm gear is small. Additionally, the worms self-lock, helping to prevent reversal. However, this mechanism is not entirely reliable. Worm gears can be found in elevators, fishing reels, sprockets, and automotive power steering.
Another advantage of worm gears is that they are easy to manufacture. The rationale behind this design is to have two mutually perpendicular axes. Then, two or more threads are added to the worm gear. The common tangent between these two shafts intersects the pitch line of the worm gear shaft. This is the basis of transfer speed.

China high quality Helical Gear Reducer Motor Parallel Shaft Reducer Gearbox worm gear box elecon
editor by CX 2023-04-25

China 90 Degree Shaft Fcndk 075 Worm Gear Box worm gear reducer buy

Item Description

Modifying and broadcasting of principal supplies

one. Physique, die-casting aluminum alloy

2. Worm shaft, 20 Crq steel, large temperature remedy

three. Worm gear, nickel bronze alloy

four. Aluminum alloy human body, sandblasting and floor anti-corrosion therapy

five. Cast iron entire body, painted with bIu RA5571.

Normal middle distance specification modifying and broadcasting

Middle length: 130 (unit: mm).

Output hole/shaft diameter: eleven, fourteen, 18, twenty five, 28, 35, forty two, 45 (unit: mm)

/ UNIT
| 1 UNIT

(Min. Order)

###

Hardness:	Hardened Tooth Surface
Installation:	90 Degree
Layout:	Expansion
Gear Shape:	Cylindrical Gear
Step:	Single-Step
Type:	Gear Reducer

###

Samples:	US$ 60/Piece 1 Piece(Min.Order) \| Request Sample

/ UNIT
| 1 UNIT

(Min. Order)

###

Hardness:	Hardened Tooth Surface
Installation:	90 Degree
Layout:	Expansion
Gear Shape:	Cylindrical Gear
Step:	Single-Step
Type:	Gear Reducer

###

Samples:	US$ 60/Piece 1 Piece(Min.Order) \| Request Sample

Advantages and disadvantages of worm gear reducer gearbox

If you are looking for a worm gear reducer gearbox, you have come to the right place. This article will cover the pros and cons of worm gear reducer gearboxes and discuss the different types available. You will learn about multi-head worm gear reducer gearboxes, hollow shaft worm gear reducer gearboxes as well as hypoid gear sets and motors.
worm reducer

Hollow shaft worm gear reducer gearbox

Hollow shaft worm gear reducer gearboxes are used to connect two or more rotating parts. They are available in single-axis and dual-axis versions and can be connected to various motor types. They can also have different ratios. The ratios of these gear reducer gearboxes depend on the quality of the bearings and assembly process.
Hollow shaft worm gear reducer gearboxes are made of bronze worm gears and cast iron hubs. The gears are lubricated with synthetic oil. They are lightweight and durable. They can be installed in various engine housings. Additionally, these gear reducer gearboxes are available in a variety of sizes. The range includes 31.5, 40, 50, 63, and 75mm models. Other sizes are available upon request.
In addition to worm gear reducer gearboxes, there are also helical gear reducer gearboxes. These reducer gearboxes can achieve very low output speeds. They are also suitable for all-around installations. In addition, the advantage of a multi-stage reducer gearbox is that it is more efficient than a single-stage gear reducer gearbox. They also feature low noise, low vibration, and low energy consumption.
Hollow shaft worm gear reducer gearboxes are generally less expensive and last longer. They are also a suitable replacement for solid shaft gearboxes for machines that require high torque without compromising strength. Typical gear arrangements include worm, spur, helical and bevel gears. Gear ratio is the ratio of input torque to output torque.

Multi-head worm gear reducer gearbox

The multi-head worm gear reducer gearbox is used to reduce the speed of the machine. It uses friction to hold the worm in place while transmitting power. These gears can also be called ground worms and hardened worm gears. They are useful in conveying systems and most engineering applications.
Multiple worm reducer gearboxes have a large number of gear ratios. These gear designs have a central cross-section that forms the front and rear boundaries of the worm gear. This design is a better choice than other worm gears because it is less prone to wear and can be used with a variety of motors and other electronics.
Adjustable multi-head worm gear reducer gearbox to reduce axial play. Usually, the backlash on the left and right sides of the worm is the same. However, if you need less backlash, you can buy a double lead worm gear. This design is ideal for precision applications requiring small clearances. The lead of the opposing teeth of the double worm gear is different from the right side, so the backlash can be adjusted without adjusting the center distance between the worm gears.
Worm gear reducer gearboxes are available from a variety of manufacturers. Many gear manufacturers stock these gears. Since the gear ratios are standardized, there is no need to adjust the height, diameter, or length of the shaft. Worm gears have fewer moving parts, which means they require less maintenance.
worm reducer

Hypoid Gear Set

Worm gears are the most common type of gear. While these gears are great for high-to-low ratios, hypoid gear sets are much more efficient in all ratios. This difference is due to higher torque density, better geometry and materials, and the way hypoid gears transmit force differently than worm gears.
Hypoid gear sets have curved helical teeth. This results in smooth gear meshing and little noise. This is because the hypoid gears start to slowly contact each other, but the contact progresses smoothly from tooth to tooth. This reduces friction and wears, thereby increasing the efficiency of the machine.
The main advantages of hypoid gears over worm gears are higher torque capacity and lower noise levels. Although their upfront cost may be higher, hypoid gears are more efficient than worm gears. They are able to handle higher initial inertia loads and can deliver more torque with a smaller motor. This saves money in the long run.
Another advantage of hypoid gears is the lower operating temperature. They also do not require oil lubrication or ventilation holes, reducing maintenance requirements. The hypoid gear set is maintenance-free, and the grease on the hypoid gear set lasts for decades.

Hypoid gear motor

A hypoid gear motor is a good choice for a worm gear reducer gearbox as it allows for a smaller motor and more efficient energy transfer. In fact, a 1 hp motor driving a hypoid reducer gearbox can provide the same output as a 1/2 hp motor driving a worm reducer gearbox. A study by Agknx compared two gear reduction methods and determined that a hypoid gear motor produces more torque and power than a worm reducer gearbox when using a fixed reduction ratio of 60:1. The study also showed that the 1/2 HP hypoid gear motor is more energy efficient and reduces electricity bills.
Worm reducer gearboxes run hotter than hypoid gears, and the added heat can shorten their lifespan. This can cause components to wear out faster, and the motor may require more frequent oil changes. In addition, hypoid gear motors are more expensive to manufacture.
Compared to worm gears, hypoid gears offer higher efficiency and lower operating noise. However, they require additional processing techniques. They are made of bronze, a softer metal capable of absorbing heavy shock loads. Worm drives require work hardening and are less durable. Operating noise is reduced by up to 30%, and hypoid gears are less prone to breakage than bevel gears.
Hypoid gear motors are prized for their efficiency and are used in applications requiring lower torque. A unique hypoid tooth profile reduces friction. In addition, hypoid gear motors are ideal for applications where space is limited. These geared motors are often used with pulleys and levers.

R series worm gear reducer gearbox

R series worm gear reducer gearboxes have a variety of characteristics that make them ideal for different applications. Its high rigidity cast iron housing and rigid side gears are designed for smooth drive and low noise. It also features high load capacity and long service life. Additionally, it can be assembled into many different configurations as required.
High efficiency, large output torque and good use efficiency. It comes in four basic models ranging from 0.12KW to 200KW. It can be matched with right angle bevel gearbox to provide large speed ratio and high torque. This combination is also suitable for low output and high torque.
worm reducer

AGKNX Electric Worm Gear reducer gearbox

AGKNX Electric worm gear reducer gearboxes are available with NEMA C-face mounting flanges for a variety of motors. These reducer gearboxes feature double lip oil seals, an aluminum alloy housing, and two bearings on the input and output shafts. These reducer gearboxes are rust-proof and have epoxy paint on the inside. They are available in a variety of ratios, from 7.5:1 to 100:1.
Worm reducer gearboxes are one of the most cost-effective and compact gears. These reducer gearboxes increase output torque while reducing input speed. AGKNX Electric’s worm gear reducer gearboxes are pre-installed with Mobil SHC634 Synthetic Gear Oil. These reducer gearboxes have an internal oil gallery guide to protect the shaft. They also have a one-piece cast iron housing.
AGKNX Electric Corporation is the leading independent distributor of electric motors in the United States. They have eight strategically located warehouses, enabling them to ship most orders on the same day. They offer motors of various sizes up to 20,000 hp. They also offer a variety of motor controls and variable speed drives.
China 90 Degree Shaft Fcndk 075 Worm Gear Box worm gear reducer buy
editor by CX 2023-03-27

China Simple Operation Reducer Worm Drive Gearbox for Agricultural Machinery From China Leading Supplier worm gear box elecon

Product Description

Item Description

Solution Parameters

Packaging & Shipping

Business Profile

To Be Negotiated 1 Piece
(Min. Order)

###

Application:	Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness:	Soft Tooth Surface
Installation:	90 Degree
Layout:	Coaxial
Gear Shape:	Conical – Cylindrical Gear
Step:	Stepless

###

Customization:	Available \| Customized Request

To Be Negotiated 1 Piece
(Min. Order)

###

Application:	Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness:	Soft Tooth Surface
Installation:	90 Degree
Layout:	Coaxial
Gear Shape:	Conical – Cylindrical Gear
Step:	Stepless

###

Customization:	Available \| Customized Request

Worm reducer gearbox

Worm reducer gearboxes are commonly used to reduce the Agknx produced by a rotating shaft. They can achieve reduction ratios of five to sixty. In contrast, a single-stage hypoid gear can achieve up to a 120:1 reduction ratio. For further reduction, another type of gearing is used. So, a single stage worm reducer gearbox cannot achieve higher ratios than these.<br

Mechanics

A worm reducer gearbox is an auxiliary mechanical device that uses worms to reduce the size of a rotating shaft. These worms have a range of tooth forms. One form is a line weave twist surface. Another is a trapezoid based on a central cross section. The trapezoid can be perpendicular to the tooth cross section, or it can be normal to the root cross section. Other forms include involute helicoids and convolute worms, which use a straight line intersecting the involute generating line.
Worm gears are lubricated with a special lubricant. Because worm gears are complex, it’s important to use the correct lubricant. Worm gear manufacturers provide approved lubricants for their gears. Using unapproved gear oil can damage your reducer gearbox’s efficiency. The right lubricant depends on several factors, including load, speed, duty cycle, and expected operating temperatures.
The efficiency of a worm gear reducer gearbox depends on several factors, including losses at gear mesh, losses in the bearings, and windage in the oil seal lip. In addition, the worm gear reducer gearbox’s efficiency varies with ambient temperature and operating temperature. The worm gear reducer gearbox’s efficiency can also vary with the ratio of the load. Moreover, worm gear reducer gearboxes are subject to break-in.
Worm gear reducer gearboxes are used in many different applications. They are typically used in small electric motors, but they’re also used in conveyor systems, presses, elevators, and mining applications. Worm gears are also commonly found in stringed musical instruments.
Worm gears have excellent reduction ratios and high Agknx multiplication, and they’re often used as speed reducer gearboxes in low to medium-speed applications. However, the efficiency of worm gear reducer gearboxes decreases with increasing ratios.

Sizes

Worm reducer gearboxes come in different sizes and tooth shapes. While the tooth shape of one worm is similar to the other, different worms are designed to carry a different amount of load. For example, a circular arc worm may have a different tooth shape than one with a secondary curve. Worm gears can also be adjusted for backlash. The backlash is the difference between the advancing and receding arc.
There are two sizes of worm reducer gearboxes available from Agknx Transmission. The SW-1 and SW-5 models offer ratios of 3.5:1 to 60:1 and 5:1 to 100:1 respectively. The size of the worm reducer gearbox is determined by the required gear ratio.
Worm gears have different thread counts. One is based on the central cross-section of the worm, and the other is on the right. Worm gears can have either a single or double thread. Single-threaded gears will reduce speed by 50 percent, while double-threaded gears will reduce speed by 25 percent.
Worm gear reducer gearboxes are lightweight and highly reliable. They can accommodate a variety of NEMA input flanges and hollow output bore sizes. Worm reducer gearboxes can be found at 6 regional warehouses, with prepaid freight. To make a purchasing decision, you should consider the horsepower and Agknx requirements of your specific application.

Applications

The Worm reducer gearbox market is a global business that is dominated by the North American and European regions. The report provides in-depth information on the market trends, key challenges, and opportunities. It also examines the current state of the industry and projects future market growth. The report is organized into segments based on product type, major geographical regions, and application. It also presents statistics and key data about the market.
Worm gear reducer gearboxes have many applications. They can be used to increase the speed of convey belts. They also help reduce noise. Worm gears have many teeth that touch the gear mesh, which makes them quieter. Moreover, the worm gears require only a single stage reducer gearbox, reducing the number of moving parts in the system.
The worm gear has long life and is suitable for different industries. It is a perfect choice for elevators and other applications that need fast stopping and braking. Its compact size and ability to hold a load make it suitable for these applications. It also prevents the load from free-falling as a result of a sudden braking. Worm gears can also be used in heavy-duty machinery such as rock crushers.
Worm gears are similar to ordinary gears except that they transfer motion at a 90-degree angle. As a result, the worm gears are extremely quiet, making them a suitable option for noise sensitive applications. They are also excellent for low-voltage applications, where the noise is critical.
Worm gears are ideal for applications with space restrictions, because they require fewer gear sets. The worm gears also allow for a smaller gearbox size. Consequently, they are the perfect choice for machines that are space-constrained, such as conveyors and packaging equipment.

Cost

The lifespan of a worm gear reducer gearbox is comparable to other gear reducer gearboxes. Worm gears have a long history of innovation and use in various industries, from shipbuilding to automobile manufacturing. Today, these gear reducer gearboxes are still popular with engineers. However, there are some things to keep in mind before buying one.
In the first place, a worm reducer gearbox needs to be affordable. Generally, a worm reducer gearbox costs about $120. The price varies with the brand name and features. Some products are more expensive than others, so be sure to shop around for the best price. In addition, it is important to consider the quality and design of the worm reducer gearbox before making a purchase.
Worm gear manufacturers have made significant advancements in materials, design and manufacturing. These advancements, along with the use of advanced lubricants, have resulted in significant increases in efficiency. For example, double enveloping worm gear reducer gearboxes have improved efficiency by three to eight percentage points. This improvement was achieved through rigorous testing of manufacturing processes and materials. With these improvements, worm gear reducer gearboxes have become more desirable in today’s market.
Worm reducer gearboxes are extremely versatile and reliable, and are available in a variety of sizes. Domestic manufacturers usually stock a large selection of reducer gearboxes, and are often able to ship them the same day you place your order. Most major domestic worm gear reducer gearbox manufacturers also share some critical mounting dimensions, such as the output shaft diameter, the mounting hole location, and the overall reducer gearbox housing height. Most manufacturers also offer standardized gear ratios. Some manufacturers have also improved gear design and added synthetic lubricants for better performance.
In addition, different tooth shapes of worms can increase their load carrying capacity. They can be used on secondary curves and circular arc cross sections. Moreover, the pitch point defines the boundary of the cross section. The mesh on the receding arc is smoother than that of the advancing arc. However, in the case of negative shifting, most of the mesh is on the receding arc.
worm reducer

Self-locking function

A worm reducer gearbox has a self-locking function. When a worm is fitted with all of its addendum teeth, the total number of teeth in the system should be greater than 40. This self-locking function is achieved through the worm’s rack and pinion mechanism. The worm’s self-locking feature can prevent the load from being dropped and is useful for many applications.
The self-locking function of a worm reducer gearbox is possible for two main reasons. First of all, a worm reducer gearbox uses two or more gears. One gear is placed at the input, and the other gear runs the output shaft. This mechanism produces a torque, which is transmitted to a spur gear.
Worm reducer gearboxes can be used in a variety of industrial applications. Because of their self-locking function, they are useful for preventing back-driving. They are also helpful for lifting and holding loads. Their self-locking mechanism allows for a large gear reduction ratio without increasing the size of a gear box.
Self-locking gears can be used to prevent back-driving and inertial driving. This is useful for many industries and can prevent backdriving. However, one major disadvantage of self-locking gears is their sensitivity to operating conditions. Lubrication, vibration, and misalignment can affect their reliability.
Embodiments of the invention provide a self-locking mechanism that prevents back-driving but allows forward-driving. The self-locking mechanism may comprise first and second ratchet cams disposed about a gear member. A releasable coupling member may be interposed between the gear member and the ratchet cam. This facilitates selective coupling and decoupling.
The worm reducer gearbox has several advantages. Its compact design is ideal for many mechanical transmission systems. It also provides greater load capacity than a cross-axis helical gear mechanism.

China Simple Operation Reducer Worm Drive Gearbox for Agricultural Machinery From China Leading Supplier worm gear box elecon
editor by czh 2023-01-31

China Wpa 50 Mini Gear Reducer Small Worm Gear Reducer Gear Box aluminum worm gearbox

Product Description

WPA fifty mini gear reducer little worm gear reducer gear box

Attributes:
1. Compact construction and basic assembly
two. Vast velocity ranges and high torque
3. Lower sound, very good sealing performance, high efficiency
four. Secure and protected, prolonged life time, common
5. Multi-composition, various assembling strategies

Item photograph:

Specification:

ANG WP Worm reducer
Design	WPA WPS WPDA WPDS WPO WPX…
Dimensions	forty-250(single stage)
Input electricity	.12kw ~ 33kw
Input speed	750rpm ~ 2000rpm
Reduction ratio	1/ten ~ 1/sixty(one stage)
Input motor	AC (1 period or 3 stage) / DC motor
Output torque	6-6050Nm
Put in kind	Foot / Sound shaft / Hollow shaft…
Substance of housing	Die-forged iron
Software	Food Things, Ceramics, Chemical, Packing, Dyeing, Woodworking, Glass, and so forth.

FAQ
Q: Can you make the reducer with customization?
A: Of course, we can customise for each your ask for, like flange, shaft, configuration, content, etc.

Q: Do you give samples?
A: Sure. Sample is offered for tests.

Q: What is your MOQ?
A: It is 10pcs for the commencing of our enterprise.

Q: What is your lead time?
A: Standard merchandise want 5-30days, a little bit longer for custom-made products.

Q: Do you provide technological innovation help?
A: Of course. Our firm have layout and improvement crew, we can give technologies support if you
require.

Q: How to ship to us?
A: It is offered by air, or by sea, or by train.

Q: How to spend the cash?
A: T/T and L/C is chosen, with diverse forex, like USD, EUR, RMB, and so forth.

Q: How can I know the item is appropriate for me?
A: >1^ST validate drawing and specification >2^nd check sample >3^rd begin mass creation.

Q: Can I appear to your company to pay a visit to?
A: Indeed, you are welcome to pay a visit to us at any time.

Q: How shall we contact you?
A: You can send inquiry directly, and we will respond in 24 several hours.

US $15-25
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Machinery
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Layout:	Right Angle
Gear Shape:	Cylindrical Gear
Step:	Single-Step

###

Samples:	US$ 50/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

ANG WP Worm reducer
Model	WPA WPS WPDA WPDS WPO WPX…
Size	40-250(single stage)
Input power	0.12kw ~ 33kw
Input speed	750rpm ~ 2000rpm
Reduction ratio	1/10 ~ 1/60(single stage)
Input motor	AC (1 phase or 3 phase) / DC motor
Output torque	6-6050Nm
Install type	Foot / Solid shaft / Hollow shaft…
Material of housing	Die-cast iron
Application	Food Stuff, Ceramics, Chemical, Packing, Dyeing, Woodworking, Glass, etc.

US $15-25
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Machinery
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Layout:	Right Angle
Gear Shape:	Cylindrical Gear
Step:	Single-Step

###

Samples:	US$ 50/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

ANG WP Worm reducer
Model	WPA WPS WPDA WPDS WPO WPX…
Size	40-250(single stage)
Input power	0.12kw ~ 33kw
Input speed	750rpm ~ 2000rpm
Reduction ratio	1/10 ~ 1/60(single stage)
Input motor	AC (1 phase or 3 phase) / DC motor
Output torque	6-6050Nm
Install type	Foot / Solid shaft / Hollow shaft…
Material of housing	Die-cast iron
Application	Food Stuff, Ceramics, Chemical, Packing, Dyeing, Woodworking, Glass, etc.

Worm gear reducer gearbox

Cheaper than planetary gearboxes In many cases, worm gear reducer gearboxes are a popular alternative to planetary gearboxes. A worm gear reducer gearbox is a mechanical device with vertical input and output shafts. This allows for very high reduction ratios. They are typically used in high-reduction situations such as machine tools.
Worm gears are cheaper than traditional gearboxes. They also have many benefits, including noise reduction. The output shaft of the worm gear reducer gearbox is almost 90 degrees from the motor input shaft, making it ideal for high-torque applications.
The worm gear reducer gearbox adopts an aluminum body, which is light in weight and high in operation efficiency. Additionally, they are available with hollow shafts and mounting flanges. In terms of initial cost, worm gear reducer gearboxes are cheaper than planetary gearboxes. In addition, they have better efficiency and longer service life.
Worm drives are also ideal for portable battery-powered lifting equipment. The high gear ratio of the worm gear ensures that it does not reverse drive. The worm gear has a spring-applied brake that holds the motor in place.
Planetary gearboxes are popular among industrial users. The efficiency of planetary gearboxes is important for practical applications.
worm reducer

pocket

The compact worm gear unit consists of a housing with an inner cavity. It has two side walls, one on either side of the front cover (13) and one on both sides of the rear cover (14). The front end cap is screwed onto the housing and the inner cavity is accessed through the rear end cap.
The compact worm gear unit can be configured to suit your application. They have many advantages, including saving space and increasing torque. The range includes single-envelope and double-envelope versions, available in a number of different power ratings. Additionally, they are IP65-rated, making them ideal for applications involving high radial or axial forces.
The compact worm reducer gearbox is a simple but effective worm drive. Its worm gear 16 meshes with the output shaft and rotates relatively stably. It also has a front-end cap and rear bearing. This enables the compact worm reducer gearbox to reduce vibration without damaging the output shaft.
Compact worm gear reducer gearboxes are ideal for many applications and offer high efficiency. The compact design means you can mount them on the motor’s flange or base. Its durable construction makes it ideal for a variety of industries. They are extremely durable and can handle high-pressure and washdown conditions. They also come standard with a synthetic shaft.

high efficiency

High-efficiency worm gear reducer gearboxes are ideal for applications that require precision, repeatability, and efficient performance. These reducer gearboxes are designed with state-of-the-art servo motor technology to provide tight integration and an angular backlash of less than two arc minutes. The reduction ratio can be lower if the application requires it.
Rising energy costs have led to an increased focus on the efficiency of drives. In response to this, manufacturers have increased the efficiency of worm gear reducer gearboxes through a number of technical improvements. By minimizing losses from rolling and sliding friction, worm gear reducer gearboxes are more efficient than their counterparts.
The high-efficiency worm reducer gearbox is simple in design and has the characteristics of a compact structure, high-speed ratio, low power consumption, and self-locking. Other advantages of these reducer gearboxes include low noise and long service life. Many also have built-in control systems that allow manual and remote adjustments. They also feature automatic shutdown protection and thermal protection.
High-efficiency worm reducer gearboxes can be used for mechanical acceleration. The input hypoid gear is usually made of steel, while the output hypoid gear is usually made of bronze. Bronze is a soft metal that is good at absorbing shock loads. However, bronze requires work hardening to achieve optimum hardness. For large worm gears, this process can take 300 to 550 hours.
worm reducer

low clearance

A low-clearance worm reducer gearbox is a device used to adjust the speed of a rotating shaft. It uses a worm gear consisting of two members. One worm is at one end of the shaft and the other is at the other end. Both worms are screwed into the synchronous drive structure.
Low clearance worm gear reducer gearboxes can be produced on conventional worm gear production lines without overlapping investments. These units are usually made of soft rubber. Also, they are relatively quiet in operation. These machines are designed so that they are suitable for use in elevators. The softer material in the worm gear also helps absorb shock loads.
The tooth profile of the worm gear is designed to change with the axial movement of the worm. Worms have thinner right teeth and thicker left teeth. As the worm moves to the right, its teeth mesh with the worm gear, reducing backlash.
There are many different types of worm gears. The design of gears depends on many factors, including backlash, thermal design, friction factors and lubrication. Worm gears are made of several different materials. Some different types of materials used in worm gears require special lubrication.

quieter

The quieter worm reducer gearbox is designed to reduce the noise level of the rotating gear motor. The device has more gear teeth in meshing contact with the gears, which helps it run more quietly. In addition to being quieter than other transmissions, it’s also less expensive than its counterparts.
Worm gearboxes can be used for different applications, but they are not as efficient as helical gearboxes. Worm reducer gearboxes are cheaper but less than 90% efficient. Higher gear ratios reduce efficiency, so worm gear reducer gearboxes are better suited for applications that require low-speed torque. The cost of buying a worm gearbox will depend on the horsepower and gear ratios required.
Worm reducer gearboxes are also more comfortable to use than planetary gearboxes. They don’t vibrate and heat up quickly, making them an excellent choice for low to medium horsepower applications. Worm gear reducer gearboxes can be upgraded to improve their performance by combining with other gear trains or gearboxes.
worm reducer

easy to replace

An easily replaceable worm gear reducer gearbox can save you a lot of money. A worm gear reducer gearbox is part of a chain drive and allows you to change gear ratios quickly and easily. Worm gear reducer gearboxes can be easily replaced in a number of ways. It’s a good idea to read the manufacturer’s manual before replacing a worm gear reducer gearbox. Make sure you have the instructions available so you can refer to them in the future.
Worm gear reducer gearboxes offer many advantages, including long service life and low noise. They are also designed with a 90-degree output shaft for easy installation. Another advantage of these gear reducer gearboxes is that they can be used with both solid and hollow output shafts. This means less maintenance and downtime.
Worm gear reducer gearboxes are widely used. Most gear manufacturers have large inventories. Worm gears also have uniform mounting dimensions. Dimensional consistency means you don’t have to worry about matching the shaft length and diameter to the worm gear. You can easily find a replacement worm gear reducer gearbox for your equipment.
When replacing the worm gear reducer gearbox, check the lubricating oil recommended by the machine. If not included, use original gear oil. Be sure to follow the manufacturer’s instructions carefully.

China Wpa 50 Mini Gear Reducer Small Worm Gear Reducer Gear Box aluminum worm gearbox
editor by czh 2022-12-29

China Nmrv Worm Speed Reducer Transmission Gear Box with Flexible Mounting worm gearbox assembly

Solution Description

Major Materials:
1)housing:aluminium alloy ADC12(measurement 571-090) die forged iron HT200(size 110-a hundred and fifty)
2)Worm:20Cr, ZI Involute profile carbonize&quencher heat treatment method make gear surface hardness up to 56-62 HRC After precision grinding, carburization layer’s thickness in between .3-.5mm.
3)Worm Wheel:wearable stannum alloy CuSn10-one

Thorough Photographs

Blend Possibilities:
Input:with input shaft, With sq. flange,With IEC normal input flange
Output:with torque arm, output flange, one output shaft, double output shaft, plastic protect
Worm reducers are accessible with diffferent combinations: NMRV+NMRV, NMRV+NRV, NMRV+Pc, NMRV+UDL, NMRV+MOTORS

Exploded Look at:

Merchandise Parameters

Outdated Model	New Model	Ratio	Center Distance	Energy	Enter Dia.	Output Dia.	Output Torque	Bodyweight
RV571		7.5~100	25mm	.06KW~.12KW	Φ9	Φ11	21N.m	.7kgs
RV030	RW030	7.5~a hundred	30mm	.06KW~.25KW	Φ9(Φ11)	Φ14	45N.m	1.2kgs
RV040	RW040	seven.5~a hundred	40mm	.09KW~.55KW	Φ9(Φ11,Φ14)	Φ18(Φ19)	84N.m	two.3kgs
RV050	RW050	7.5~100	50mm	.12KW~1.5KW	Φ11(Φ14,Φ19)	Φ25(Φ24)	160N.m	3.5kgs
RV063	RW063	seven.5~one hundred	63mm	.18KW~2.2KW	Φ14(Φ19,Φ24)	Φ25(Φ28)	230N.m	6.2kgs
RV075	RW075	7.5~100	75mm	.25KW~4.0KW	Φ14(Φ19,Φ24,Φ28)	Φ28(Φ35)	410N.m	9.0kgs
RV090	RW090	seven.5~a hundred	90mm	.37KW~4.0KW	Φ19(Φ24,Φ28)	Φ35(Φ38)	725N.m	13.0kgs
RV110	RW110	7.5~a hundred	110mm	.55KW~7.5KW	Φ19(Φ24,Φ28,Φ38)	Φ42	1050N.m	35.0kgs
RV130	RW130	seven.5~one hundred	130mm	.75KW~7.5KW	Φ24(Φ28,Φ38)	Φ45	1550N.m	forty eight.0kgs
RV150	RW150	seven.5~100	150mm	2.2KW~15KW	Φ28(Φ38,Φ42)	Φ50		84.0kgs

GMRV Outline Dimension:

GMRV	A	B	C	C1	D(H8)	E(h8)	F	G	G1	H	H1	I	M	N	O	P	Q	R	S	T	BL	β	b	t	V
030	eighty	ninety seven	fifty four	44	14	fifty five	32	fifty six	sixty three	sixty five	29	55	forty	fifty seven	30	seventy five	forty four	six.five	21	5.5	M6*ten(n=4)	0°	5	sixteen.three	27
040	one hundred	121.5	70	sixty	eighteen(19)	60	43	71	seventy eight	seventy five	36.5	70	fifty	seventy one.five	40	87	55	6.five	26	6.5	M6*10(n=4)	45°	6	20.8(21.8)	35
050	a hundred and twenty	144	80	70	twenty five(24)	70	49	85	92	85	forty three.five	eighty	sixty	84	50	one hundred	64	8.5	30	seven	M8*12(n=4)	45°	eight	28.3(27.3)	forty
063	one hundred forty four	174	a hundred	85	twenty five(28)	80	67	103	112	95	53	ninety five	72	102	sixty three	110	80	8.five	36	8	M8*12(n=8)	45°	eight	28.3(31.3)	50
075	172	205	120	90	28(35)	95	seventy two	112	120	115	57	112.5	86	119	seventy five	a hundred and forty	ninety three	eleven	forty	ten	M8*14(n=8)	45°	8(ten)	31.3(38.3)	60
090	206	238	140	100	35(38)	one hundred ten	74	one hundred thirty	a hundred and forty	130	sixty seven	129.5	103	a hundred thirty five	90	a hundred and sixty	102	13	45	eleven	M10*sixteen(n=8)	45°	ten	38.3(forty one.3)	70
one hundred ten	255	295	one hundred seventy	one hundred fifteen	forty two	130	–	one hundred forty four	155	165	74	a hundred and sixty	127.five	167.5	110	two hundred	a hundred twenty five	fourteen	fifty	14	M10*eighteen(n=8)	45°	12	45.three	85
130	293	335	200	one hundred twenty	45	one hundred eighty	–	a hundred and fifty five	a hundred and seventy	215	81	179	146.five	187.five	130	250	a hundred and forty	sixteen	sixty	15	M12*20(n=8)	45°	14	48.8	one hundred
one hundred fifty	340	400	240	a hundred forty five	50	one hundred eighty	–	185	two hundred	215	ninety six	210	170	230	a hundred and fifty	250	one hundred eighty	eighteen	seventy two.five	eighteen	M12*22(n=8)	45°	fourteen	fifty three.eight	120

Business Profile

About CZPT Transmission:
We are a professional reducer manufacturer situated in HangZhou, ZHangZhoug province.
Our leading merchandise is full assortment of RV571-a hundred and fifty worm reducers , also equipped GKM hypoid helical gearbox, GRC inline helical gearbox, Personal computer units, UDL Variators and AC Motors, G3 helical equipment motor.
Items are broadly utilised for apps such as: foodstuffs, ceramics, packing, substances, pharmacy, plastics, paper-creating, construction equipment, metallurgic mine, environmental security engineering, and all varieties of automatic lines, and assembly strains.
With rapidly shipping, superior after-sales support, innovative producing facility, our merchandise market well both at property and overseas. We have exported our reducers to Southeast Asia, Japanese Europe and Center East and so on.Our goal is to build and innovate on basis of higher high quality, and generate a good track record for reducers.

Packing information:Plastic Luggage+Cartons+Wooden Circumstances , or on request
We take part Germany Hannver Exhibition-ZheJiang PTC Truthful-Turkey Win Eurasia

Logistics

Soon after Revenue Services

1.Upkeep Time and Guarantee:In 1 yr following getting goods.
two.Other Provider: Like modeling variety guide, installation guidebook, and issue resolution guidebook, etc.

FAQ

one.Q:Can you make as per customer drawing?
A: Of course, we provide customized support for buyers appropriately. We can use customer’s nameplate for gearboxes.
2.Q:What is your phrases of payment ?
   A: 30% deposit prior to generation,equilibrium T/T before shipping and delivery.
three.Q:Are you a trading company or producer?
   A:We are a manufacurer with sophisticated tools and knowledgeable staff.
four.Q:What’s your manufacturing potential?
   A:8000-9000 PCS/Month
five.Q:Free sample is offered or not?
   A:Of course, we can source cost-free sample if customer concur to shell out for the courier cost
6.Q:Do you have any certification?
   A:Yes, we have CE certificate and SGS certification report.

Make contact with data:
Ms Lingel Pan
For any queries just feel free ton make contact with me. Several many thanks for your variety focus to our business!

US $12-220
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery, Marine, Agricultural Machinery, Industry
Function:	Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout:	Right Angle
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Double-Step

###

Samples:	US$ 12/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Old Model	New Model	Ratio	Center Distance	Power	Input Dia.	Output Dia.	Output Torque	Weight
RV025		7.5~100	25mm	0.06KW~0.12KW	Φ9	Φ11	21N.m	0.7kgs
RV030	RW030	7.5~100	30mm	0.06KW~0.25KW	Φ9(Φ11)	Φ14	45N.m	1.2kgs
RV040	RW040	7.5~100	40mm	0.09KW~0.55KW	Φ9(Φ11,Φ14)	Φ18(Φ19)	84N.m	2.3kgs
RV050	RW050	7.5~100	50mm	0.12KW~1.5KW	Φ11(Φ14,Φ19)	Φ25(Φ24)	160N.m	3.5kgs
RV063	RW063	7.5~100	63mm	0.18KW~2.2KW	Φ14(Φ19,Φ24)	Φ25(Φ28)	230N.m	6.2kgs
RV075	RW075	7.5~100	75mm	0.25KW~4.0KW	Φ14(Φ19,Φ24,Φ28)	Φ28(Φ35)	410N.m	9.0kgs
RV090	RW090	7.5~100	90mm	0.37KW~4.0KW	Φ19(Φ24,Φ28)	Φ35(Φ38)	725N.m	13.0kgs
RV110	RW110	7.5~100	110mm	0.55KW~7.5KW	Φ19(Φ24,Φ28,Φ38)	Φ42	1050N.m	35.0kgs
RV130	RW130	7.5~100	130mm	0.75KW~7.5KW	Φ24(Φ28,Φ38)	Φ45	1550N.m	48.0kgs
RV150	RW150	7.5~100	150mm	2.2KW~15KW	Φ28(Φ38,Φ42)	Φ50		84.0kgs

###

GMRV	A	B	C	C1	D(H8)	E(h8)	F	G	G1	H	H1	I	M	N	O	P	Q	R	S	T	BL	β	b	t	V
030	80	97	54	44	14	55	32	56	63	65	29	55	40	57	30	75	44	6.5	21	5.5	M6*10(n=4)	0°	5	16.3	27
040	100	121.5	70	60	18(19)	60	43	71	78	75	36.5	70	50	71.5	40	87	55	6.5	26	6.5	M6*10(n=4)	45°	6	20.8(21.8)	35
050	120	144	80	70	25(24)	70	49	85	92	85	43.5	80	60	84	50	100	64	8.5	30	7	M8*12(n=4)	45°	8	28.3(27.3)	40
063	144	174	100	85	25(28)	80	67	103	112	95	53	95	72	102	63	110	80	8.5	36	8	M8*12(n=8)	45°	8	28.3(31.3)	50
075	172	205	120	90	28(35)	95	72	112	120	115	57	112.5	86	119	75	140	93	11	40	10	M8*14(n=8)	45°	8(10)	31.3(38.3)	60
090	206	238	140	100	35(38)	110	74	130	140	130	67	129.5	103	135	90	160	102	13	45	11	M10*16(n=8)	45°	10	38.3(41.3)	70
110	255	295	170	115	42	130	–	144	155	165	74	160	127.5	167.5	110	200	125	14	50	14	M10*18(n=8)	45°	12	45.3	85
130	293	335	200	120	45	180	–	155	170	215	81	179	146.5	187.5	130	250	140	16	60	15	M12*20(n=8)	45°	14	48.8	100
150	340	400	240	145	50	180	–	185	200	215	96	210	170	230	150	250	180	18	72.5	18	M12*22(n=8)	45°	14	53.8	120

US $12-220
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery, Marine, Agricultural Machinery, Industry
Function:	Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout:	Right Angle
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Double-Step

###

Samples:	US$ 12/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Old Model	New Model	Ratio	Center Distance	Power	Input Dia.	Output Dia.	Output Torque	Weight
RV025		7.5~100	25mm	0.06KW~0.12KW	Φ9	Φ11	21N.m	0.7kgs
RV030	RW030	7.5~100	30mm	0.06KW~0.25KW	Φ9(Φ11)	Φ14	45N.m	1.2kgs
RV040	RW040	7.5~100	40mm	0.09KW~0.55KW	Φ9(Φ11,Φ14)	Φ18(Φ19)	84N.m	2.3kgs
RV050	RW050	7.5~100	50mm	0.12KW~1.5KW	Φ11(Φ14,Φ19)	Φ25(Φ24)	160N.m	3.5kgs
RV063	RW063	7.5~100	63mm	0.18KW~2.2KW	Φ14(Φ19,Φ24)	Φ25(Φ28)	230N.m	6.2kgs
RV075	RW075	7.5~100	75mm	0.25KW~4.0KW	Φ14(Φ19,Φ24,Φ28)	Φ28(Φ35)	410N.m	9.0kgs
RV090	RW090	7.5~100	90mm	0.37KW~4.0KW	Φ19(Φ24,Φ28)	Φ35(Φ38)	725N.m	13.0kgs
RV110	RW110	7.5~100	110mm	0.55KW~7.5KW	Φ19(Φ24,Φ28,Φ38)	Φ42	1050N.m	35.0kgs
RV130	RW130	7.5~100	130mm	0.75KW~7.5KW	Φ24(Φ28,Φ38)	Φ45	1550N.m	48.0kgs
RV150	RW150	7.5~100	150mm	2.2KW~15KW	Φ28(Φ38,Φ42)	Φ50		84.0kgs

###

GMRV	A	B	C	C1	D(H8)	E(h8)	F	G	G1	H	H1	I	M	N	O	P	Q	R	S	T	BL	β	b	t	V
030	80	97	54	44	14	55	32	56	63	65	29	55	40	57	30	75	44	6.5	21	5.5	M6*10(n=4)	0°	5	16.3	27
040	100	121.5	70	60	18(19)	60	43	71	78	75	36.5	70	50	71.5	40	87	55	6.5	26	6.5	M6*10(n=4)	45°	6	20.8(21.8)	35
050	120	144	80	70	25(24)	70	49	85	92	85	43.5	80	60	84	50	100	64	8.5	30	7	M8*12(n=4)	45°	8	28.3(27.3)	40
063	144	174	100	85	25(28)	80	67	103	112	95	53	95	72	102	63	110	80	8.5	36	8	M8*12(n=8)	45°	8	28.3(31.3)	50
075	172	205	120	90	28(35)	95	72	112	120	115	57	112.5	86	119	75	140	93	11	40	10	M8*14(n=8)	45°	8(10)	31.3(38.3)	60
090	206	238	140	100	35(38)	110	74	130	140	130	67	129.5	103	135	90	160	102	13	45	11	M10*16(n=8)	45°	10	38.3(41.3)	70
110	255	295	170	115	42	130	–	144	155	165	74	160	127.5	167.5	110	200	125	14	50	14	M10*18(n=8)	45°	12	45.3	85
130	293	335	200	120	45	180	–	155	170	215	81	179	146.5	187.5	130	250	140	16	60	15	M12*20(n=8)	45°	14	48.8	100
150	340	400	240	145	50	180	–	185	200	215	96	210	170	230	150	250	180	18	72.5	18	M12*22(n=8)	45°	14	53.8	120

Advantages and disadvantages of worm gear reducer gearbox

Hollow shaft worm gear reducer gearbox

Multi-head worm gear reducer gearbox

Hypoid Gear Set

Hypoid gear motor

R series worm gear reducer gearbox

AGKNX Electric Worm Gear reducer gearbox

AGKNX Electric worm gear reducer gearboxes are available with NEMA C-face mounting flanges for a variety of motors. These reducer gearboxes feature double lip oil seals, an aluminum alloy housing, and two bearings on the input and output shafts. These reducer gearboxes are rust-proof and have epoxy paint on the inside. They are available in a variety of ratios, from 7.5:1 to 100:1.
Worm reducer gearboxes are one of the most cost-effective and compact gears. These reducer gearboxes increase output torque while reducing input speed. AGKNX Electric’s worm gear reducer gearboxes are pre-installed with Mobil SHC634 Synthetic Gear Oil. These reducer gearboxes have an internal oil gallery guide to protect the shaft. They also have a one-piece cast iron housing.
AGKNX Electric Corporation is the leading independent distributor of electric motors in the United States. They have eight strategically located warehouses, enabling them to ship most orders on the same day. They offer motors of various sizes up to 20,000 hp. They also offer a variety of motor controls and variable speed drives.
China Nmrv Worm Speed Reducer Transmission Gear Box with Flexible Mounting worm gearbox assembly
editor by czh 2022-12-18

China NMRV NRV 90 degree hollow shaft small worm gear box gearbox stepper motor reducer worm gearbox advantages

Applicable Industries: Lodges, Garment Retailers, Building Substance Shops, Manufacturing Plant, Equipment Repair Shops, Foods & Beverage Manufacturing facility, Farms, Retail, Building works , Vitality & Mining, Meals & Beverage Shops, Marketing Firm, modest worm equipment box gearbox stepper motor reducer
Gearing Arrangement: Worm
Output Torque: 1000NM
Enter Pace: 1500RPM
Output Velocity: 100RPM
Pole: 1 2 3 4 6 Phase
Ratio: eleven-87
Housing Content: Cast Iron
Functioning temperature: -forty~45℃
Software: production equipment soap
Method: Carburizing, Nitriding , Grinding
Efficiency: ninety four%~ninety eight%
Mounting Situation: Horizontal,Vertical,Flange
Color: Blue,Green,Gray,Purple
Kind: hollow shaft tiny worm gear box gearbox stepper motor reducer
Packaging Details: sea deserving wood scenario for NMRV NRV ninety diploma hollow shaft little worm gear box gearbox stepper motor reducer

Merchandise Overview _{YOUR Expert MANUFACTURE}_{—— Because 1995}NMRV Worm Gear Reducer Gearbox TianQi——industrial manufacturers NMRV NRV ninety diploma hollow shaft small worm gear box gearbox stepper motor reducer Chinese electrical motor velocity reducer is commonly utilized in mining machinery, chemical industry,metal metallurgy, lightindustry,environmental safety, paper producing, printing, lifting transport, foods market and so on. Major Collection Solution: R series helical equipment reducer, K series spiral bevel gear reducer, NGW, P collection planetary reducer, H Bseries gearbox, Z (ZDY, ZLY, ZSY, and ZFY) serial difficult tooth surface area cylindrical gear reducer, D (DBY and DCY) serial tough tooth surface cone equipment reducer, cycloid reducer, and so on. Meanwhile, map sample processing company can be carried out. Features AT A Glance The excess weight of the NMRV reducer is fairly light, and the casing substance is aluminum alloy. It has the benefits of light-weight bodyweight, excellent strength, beautiful look, higher heat dissipation functionality, prolonged service daily life, and no sound in movement. It is hassle-free and straightforward to link to the motor. Simple to install. It is a reducer with Higher Practicability. NMRV reducer is quite handy to connect with common motor, stepless pace changer, flange variety electromagnetic clutch and brake group, and does not require coupling to hook up. It is ideal for all-spherical installation, and the output torque is comparatively large, and the function is fairly stable. Shaft Mounted Flange Mounted With Electrical Motor Product Specifications

No	Item	Data
1	Power	0.37-7.5KW
2	Ratio Range	7.5-one hundred
3	Model	NMRV one hundred thirty
4	Input Pace	1500/1400rpm
5	Gear Sort	Worm Equipment
6	Casing	Aluminum
7	Center Length	130mm
8	Output diameter	11、14、18、25、28、35、42、45mm

Pakcage and DeliveryProfessional Sea Worthy Woodencase Our Manufacturing facilityProven in 1995 , HangZhou Boji Machinery is a skilled producer and exporter that is worried with the design and style, advancement and production of Gearbox Velocity Reducer. We are situated in HangZhou of ZheJiang Province, with convenient transportation entry. With our own brand name “TianQi”, all of our items comply with global good quality standards and are significantly appreciated in a variety of different marketplaces all through the world.Our company possesses full machining centre, lathe, equipment shaping machine, equipment milling machine, equipment grinding device and assembling strains. Our properly-outfitted services and superb good quality handle all through all phases of generation allows us to promise total client gratification.As a end result of our large top quality products and exceptional client provider, we have gained a International Product sales Community CZPT South The usa, Saudi Arabia, Vietnam, Pakistan, Philippines, South Africa and over 30 nations around the world and areas. Revenue AND Service Network Profitable Undertaking Undertaking in Thailand Venture in India Undertaking in Russia Similar Items FAQ 1.Q:Are you the factory or investing firm? A:We are the Manufacturing facility, with more than twenty five years of manufacturing experience.two.Q:Can you customize according to our requirements? A:Indeed, we can style nonstandard items in accordance to customer’s drawing and sample.three.Q:How lengthy is the supply day? A:ten-twenty doing work days. Cutomized type want to in accordance to the amount.4.Q:Exactly where is your manufacturing unit? A:We are in HangZhou of ZheJiang Province, you can get below by large pace teach or fly to HangZhou. Welcome to pay a visit to us!five.Q:What’s your payment conditions? A:TT 30% as deposite, 70% banlance paid out prior to supply.

A-Drive PWC single worm reducer

A worm gear is a gear used to reduce the speed of a mechanical device. Often used in the automotive and shipbuilding industries, these gears have a lifespan comparable to many other types of reducers. As a result, worm gears continue to be popular with engineers.
worm_reducer

Agknx driver

Conical drive worm reducers are an excellent choice for a variety of applications. The double-enveloping worm gear geometry of the Agknx Drive reducer provides a larger contact area and higher torque carrying capacity. This specialized gear system is also ideal for applications requiring higher precision.
Agknx Drive’s products are ideal for the solar, packaging, steel, food and pulp and paper industries. Additionally, Agknx Drive’s products are ideal for motion control and medium to heavy duty applications. The company’s dedicated sales and service teams are available to assist with your specific needs.
Agknx drive worm gear reducers are available in single, double and triple reductions. Depending on the application, a single stage unit can transport up to 7,500 lbs. of torque. Its low-cost, compact design makes it a convenient option. Conical drive gearboxes are versatile and durable.
X & H

X & H worm gear units feature worm gear sets and are available in two different series. The X-Series includes XA versions with shaft and XF to XC versions with motor mounts. Compared to the XC compact series, the XF series offers outstanding versatility and higher efficiency. The H series combines the features of the X series with a spur gear pre-stage on the input. The H series has a die cast aluminum housing and cast iron shaft.
The X & H Worm Reducer Series “H” helical gears are compatible with NMRV and C side input 56F wired motors. These gear reducers are low cost and easy to install. They feature a cast iron housing and four threaded mounting holes.
RV seriese aluminum right angle

RV seriese aluminum right angle worm reduces versatility and durability. They are available in a variety of sizes including 25, 30, 40, 50, 63, 75, 110, 130, 150. Featuring standard NEMA motor input flanges and torque arm or foot mounting options, these reducers are ideal for a variety of applications.
RV series worm gear reducer is made of high-quality aluminum alloy with compact structure. It also features light weight, corrosion resistance and low noise. Its housing is made of die-cast aluminum alloy, while the worm gear is made of 20CrM. The worm gear is heat treated by carbon quenching to increase its hardness. The thickness of the carbide layer is between 0.3-0.5mm.
These worm gear reducers have multiple functions to maximize efficiency. In addition to being corrosion resistant, they are available in a variety of sizes to suit any application. Other features include a corrosion-resistant cast iron housing, enclosed breather, double-lip seal and magnetic drain plug. These worm gear reducers are available with single or dual input shafts and are interchangeable with NMRVs.
Aluminum alloy right angle worm reducer is a light, durable and efficient gear reduction device. Its compact design makes it lighter than other gearheads, while its rust-resistant surface and long life make it an excellent choice for industrial and automotive applications. It is available in a variety of sizes, including inches.
worm_reducer AGknx Single

Worm reducers can be classified as sacrificial gears. It is used to reduce the torque of the machine. It has two parts: a worm and wheels. The worm can be made of brass or steel. Brass worm gears corrode easily. Phosphorus EP gear fluid can run on brass worm gears. It creates a thin oxide layer on the gear teeth, protecting them from impact forces and extreme mechanical conditions. Unfortunately, it can also cause serious damage to the brass wheels.
Worm reducers work by transferring energy only when the worm is sliding. This process wears away the lubricating layer and metal of the wheel. Eventually, the worm surface reaches the top of the wheel and absorbs more lubricant. This process will repeat itself in the next revolution.
Worm reducers have two benefits: they are compact and take up little space. They can slow down high-output motors while maintaining their torque. Another important feature of the worm gear reducer is its high transmission ratio capability. It can be installed in both vertical and horizontal positions, and a bidirectional version is also available.
Worm gears have some complications compared to standard gear sets, but overall they are reliable and durable. Proper installation and lubrication can make them sturdy, efficient devices.
A-Drive AGknx Single

If you’re considering purchasing a new worm gear reducer for your A-Drive AGknx single, you need to understand your goals. While single-stage worm reducers can be used, their reduction ratios are often limited. In most cases, they can only achieve a reduction ratio of 10:1. However, there are other types of gears that provide additional speed reduction capabilities.
The worm reducer consists of two parts: the input worm and the output worm. Each component has its own rotational speed, the input worm rotates in a single direction and the output worm wheel rotates vertically. In a five-to-one ratio, the input worm rotates five times for each output worm. Likewise, a 60-to-1 ratio requires 60 revolutions of each worm. Due to this arrangement, the worm reducer is inefficient. Gear reduction is inefficient due to sliding friction rather than rolling friction.
Worm reducers are also susceptible to thermal stress. They run hotter than hypoid reducers, which reduces their useful life. In addition to higher heat, worm reducers can experience component failure over time. In addition, an oil change is imminent due to the deterioration of lubrication.
The worm gear reducer of the A-Drive PPC single is a direct drive gearbox for personal watercraft. It has bronze bushings, aluminum gears, and a spool box. The spool box has a quarter-inch plated spool to wrap 1/4-inch 7 x 19 aircraft cable. Its design also makes it a more efficient alternative to belt-driven AGknx cranes.
worm_reducer AGknx X & H

The AGknx X & H worm gear reducer series is a high-performance universal mount worm gear reducer. It features a spur gear primary on the input for higher performance and a wider range of gear ratios. Its design also allows it to be used with a variety of input shaft types, including shaft and closed-coupled applications.
It is available in a variety of sizes, including popular frame sizes 90 and 110. The worm shaft is made of case-hardened alloy steel with a cast iron hub and bronze ring gear. The standard output shaft is hollow. There are also models with dual single-shaft outputs.

China NMRV NRV 90 degree hollow shaft small worm gear box gearbox stepper motor reducer worm gearbox advantages
editor by czh

China Custom High stability reducer factory servo motor speed reducer worm gearbox worm gear box elecon

Applicable Industries: Industrial robots, creation automation
Weight (KG): 22 KG
Gearing Arrangement: Planetary
Output Torque: forty-60Nm
Enter Speed: 5000-10000RPM
Output Pace: 1-10000RPM
Solution title: Higher stability reducer manufacturing facility servo motor speed reducer worm gearbox
Ratio: 3-10, 15-a hundred
Micro Backlash PO: ≤1
Micro Backlash P1: ≤3
Micro Backlash P2: ≤5
Mounting Place: All instructions
Application: Industrial robots, manufacturing automation
Packaging Details: Plastic bag, foam and carton for each and every established of planetary reducer. Or as requested.
Port: ZheJiang

Higher stability reducer factory servo motor velocity reducer worm gearbox

YK precision planetary gearbox reducer characteristics:
Reduced sound: <65db
Low backlash: Min 3arcs for Solitary stage, Min 5 arcs for Double phase.
Higher torque: Increased torque in comparison to same amount regular planetary gearbox reducer.
Large balance: Higher-power alloy steel as content, hardening treatment for the complete gear elements but not only area hardening.
Higher reduction ratio: Modular layout to ensure the higher precision link.

Technical Parameters of TER155

Phase	Unit	One Phase	Two Phase
Ratio	i	3, 4, 5, 6, 7, 8, 9, 10	15, twenty, 25, thirty, 35, forty, 45, 50, 60, 70, 80, 90, a hundred
Nominal Output Torque T 2N	Nm	one hundred thirty, 140, 160, 150, a hundred and forty, a hundred and twenty, one hundred, 100	one hundred thirty, a hundred and forty, a hundred and sixty, one hundred fifty, 140, a hundred and twenty, a hundred, one hundred sixty, 150, a hundred and forty, one hundred twenty, one hundred, 100
Emergency Cease Torque T 2NOT¹	Nm	3 Instances of Nominal Output Torque	3 Moments of Nominal Output Torque
Nominal Input Velocity n 1N	rpm	4000	4000
Max Input Velocity n 1B	rpm	8000	8000
Micro Backlash P0	arcmin	≤1	≤1
Micro Backlash P1	arcmin	≤3	≤5
Micro Backlash P2	arcmin	≤5	≤7
Torsional Rigidity	Nm/arcmin	7	seven
Max Radial Load F 2rB²	N	3250	3250
Max Axial Load F 2aB²	N	1625	1625
Service Life ³	hr	20000(Continuously 10000)	20000(Continually 10000)
Efficiency η	%	≥97%	≥94%
Fat	kg	3.7	5.three
Running Temp	°C	-10°C ~ +90°C	-10°C ~ +90°C
Lubrication		Synthetic Lubrication Oils	Artificial Lubrication Oils
Mounting Situation		All direcstions	All direcstions
Sounds (n=3000rpm, i=ten, No load)	dB(A)	≤60	≤60
Mass Times of Inertia J_one	kg.cm^two	.61, .forty eight, .forty seven, .45, .45, .44, .44, .44, 044	.47, .47, .47, .forty seven, .forty seven, .47, .forty seven, .44, .44, .forty four, .forty four, .44, .forty four

Notes: 1. Max acceleration torque T=60% of T_2NOT.
_{2. Applied to the output shaft middle at 100rpm.}
_{3. For continuous operation, the services daily life time is no considerably less than ten,000hrs.}

Organization Information and Our Service Packing and Shipping and delivery FAQQ: How extended is your delivery time?A: Generally it is ten days if the items are in inventory. or it is all around 30 times if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it totally free or additional ?A: Sure, we could provide the sample but not cost-free, and do not spend the expense of freight.
Q: What is your conditions of payment ?A: Payment=1000USD, thirty% T/T in advance, balance prior to shippment.If you have an additional query, pls really feel totally free to speak to us as below:

What Is a Gearbox?

A gearbox is the mechanical system of an automobile that allows a vehicle to change gear smoothly. This arrangement of gears is highly complex, which helps to provide a smooth gear change. In this article, we will explore some of the different types of gearboxes, including the Epicyclic gearbox, the Coaxial helical gearbox, and the Extruder helical gearing. These are three of the most common types of gearboxes used in automobiles.
gearbox

Gearboxes

Gearboxes help drivers choose the appropriate gear for the conditions. A lower gear produces the least speed, while a higher gear gives the maximum torque. The number of gears used in a gearbox varies to meet different demands on the road and load. Short gearing provides maximum torque, while tall gearing offers higher top speeds. These features combine to improve the driveability of a vehicle. But what is a gearbox?
The gearbox has a slew of components, including the bearings and seals. Among these components is the gearbox, which is subjected to wear and tear due to metal-to-metal contact. As a result, gearboxes require close monitoring. Various tests are used to assess the condition of gears, such as corrosion and wear. Proactive tests emphasize wear, contamination, and oil condition. However, there are also proactive tests, such as the ferrous density test and the AN test, which monitor additive depletion and abnormal wear.
The separating force is a key factor for the design of a gearbox. The primary radial measurement point should be oriented to monitor normal forces. The secondary measurement point should be located in the opposite direction of rotation from the primary radial measurement point. The separating force generated by a helical gear set is called tangential force. The primary and secondary radial measurement points should be positioned so as to provide information about both normal and tangential forces.
Manual gearboxes are often manual. The driver can control the synchromesh by using a selector rod. This rod moves the synchromesh to engage the gear. Reverse gears are not synchromesh because they are used only when the vehicle is at a standstill. In older cars, the first gear often lacked synchromesh due to cost or lack of torque. Drivers could still use first gear with a double-declutch.

Coaxial helical gearbox

The R series rigid tooth flank helical gearbox features high versatility and good combination. They have a wide range of motor power and allow for fine classification of transmission ratios. The R series gearbox has several advantages, including high efficiency, long service life, and low vibration. This series of gearbox can be combined with a wide range of reducers and variators. Its size and high performance makes it an ideal choice for applications that require maximum torque and load transfer.
The main feature of a helical gearbox is that it presents a fixed velocity ratio, even if the center gaps are not perfectly set. This is sometimes referred to as the fundamental rule of gearing. A helical gearbox is similar to paper spur gears in terms of radial pitch, since the shafts in the helical gearbox cross at an angle. The center gap of a helical gearbox is the same for both the left and right-handed counterparts.
The EP Series is another popular model of a Coaxial helical gearbox. This series has high torque and a maximum reduction ratio of 25.6:1. It is an ideal choice for the plastic industry, and CZPT offers an extensive range of models. Their center distance ranges from 112 mm to 450 mm. The EP Series has several models with different center distances. In addition to high torque and efficiency, this gearbox has low noise and vibration, and it is easy to assemble and disassemble.
Another type of Coaxial helical gearboxes is the planetary gearbox. They have a high efficiency and power density. Unlike coaxial helical gearboxes, planetary gearboxes have an axis on the same direction as the output shaft. They are easy to integrate into existing drive trains. In addition, they are compact and easy to integrate with existing drive trains. For servo applications, they are another great choice.
gearbox

Epicyclic gearbox

An epicyclic gearbox is a type of automatic gearbox used to drive cars. Its primary advantage is its compact design, and it is more reliable and efficient than manual gearboxes. It is comprised of a sun gear and two planetary gears, encased in a ring gear called the Annulus. This system is useful for drivers who need to shift gears frequently, as they will become tired if the gears are suddenly changed.
An epicyclic gearbox consists of three different types of gears: ring gear, sun gear, and annular ring gear. The ring gear is the outermost gear and has angular-cut teeth on its inner surface. It is used in conjunction with planetary gears to provide high-speed ratios to vehicles. The sun gear also reverses the direction of the output shaft. This helps reduce transmission error.
An epicyclic gearbox uses multiple planets to transfer power between the planets. This type of gearbox is lightweight and features a high power density. This gearbox has several benefits over a standard single-stage parallel axis gearbox, including multiple load paths, unequal load sharing, and phased meshing. Furthermore, epicyclic gearboxes require more complex transmission error optimisation than their counterparts, including more than one stage.
The objective of epicyclic gearbox research is to provide the lowest transmission error possible. The process includes an initial design and detailed specification. The system is defined by its load spectrum and required ratio. Deflections of the elastic mesh are calculated to understand their strength and how much energy the system can handle. Finally, micro-geometric corrections minimize transmission error. These improvements are crucial to the overall efficiency of an epicyclic gearbox.

Extruder helical gearing

The helix in an extruder helical gearing is fixed at an angle, enabling more interaction with the shaft in the same direction as it moves. As a result, the shaft and the bearing are in constant contact for a long period of time. Typically, extruder helical gearing is used in applications where there is low excitement, such as steel, rolling mills, conveyors, and the oil industry. The bevel gear train also plays a role in these applications.
The CZPT AEX extruder drive gear is specifically developed for this specific application. The gears are compact and lightweight and offer exceptional power density and a long service life. These extruder gears are highly reliable, and they can be used in a wide range of applications, including rubber processing, food production, and recycling plants. CZPT offers both standard and custom gearing for your extruder.
Another advantage of helical gearing is its versatility. Since the helical gearing teeth are inclined at a specific angle, they can be adjusted to meet the specific needs of a given application. These gears also have the advantage of eliminating noise and shock from straight teeth. Unlike other gearing types, they are able to achieve a wide range of loads, from small to large. These helical gears are very durable and are the best option for high-load applications.
In addition to this, asymmetric helical gears have increased flexibility, while asymmetrical helical gears have lower flexural stiffness. The ratio of teeth to the shaft has a positive effect on the strength of the gear. Furthermore, asymmetrical helical gears are easier to manufacture. But before you purchase your next extruder gear, make sure you know what you’re getting into.
gearbox

1 speed gearbox

CZPT Group Components produces the one speed gearbox. It has the potential to make cars more efficient and environmentally friendly. The gear ratio of a car’s drivetrain is crucial for reaching maximum power and speed. Typically, a one-speed gearbox delivers a maximum of 200 hp. But the speed at which a car can reach this power must be high to get the full benefit from the electric motor. So, how can a one-speed gearbox improve the speed and torque of a car?
A one-speed gearbox is a mechanical device used to switch between second and third gears. It can include multiple gear sets, such as a shared middle gear for switching between second and third gears. It can also have an intermediate gear set that represents a switchable gear in both partial transmissions. The invention also includes a mechanism that makes it easier to change gears. The patent claims are detailed below. A typical one-speed gearbox may include two parts.
Generally, a one-speed gearbox will have up to seven forward gears, with each of these corresponding to a different speed. A one-speed gearbox can have five different gear sets and five different gear levels. It can have synchronized gear sets or last-shelf gear sets. In either case, the gears are arranged in a way that maximizes their efficiency. If the gears are placed on opposite sides of a car, the transmission may be a two-speed one.
CZPT Transmission specializes in the production of high-speed gearboxes. The company’s Milltronics HBM110XT gearbox machine is the perfect tool for this job. This machine has a large working table and a heavy-duty load capacity, making it a versatile option for many kinds of applications. There are also a wide variety of CZPT gearboxes for the automotive industry.

China Custom High stability reducer factory servo motor speed reducer worm gearbox worm gear box elecon
editor by czh

China wholesaler Horizontal BWD cycloidal gear box Vertical BLD cycloidal pin wheel gearbox cycloid reducer with motor wholesaler

Gearing Arrangement: Cycloidal
Output Torque: 26N.m-22920N.m
Input Speed: 720-2800rpm
Output Speed: 0.1-400rpm
Product name: Cycloidal pin wheel reducer
Material: Steel
Bearing: CZPT Bearing
Ratio: 11~87
Output torque: 26N.m-22920N.m
Input speed: 720-2800rpm
Output speed: 0.1-400rpm
Certification: ISO9001
Warranty: 1-2 years
Mount Position: Horizontal Foot Mounted Vertical

Cycloidal gear reducer is a principle adopted K-H-V Planetary Gear less innovative gear. Its transmission process as follows : input shaft equipped with a 180-degree dislocation of the double eccentric sets, replaced with 2 eccentric turn as a roller bearing arm, the formation of H-, 2 cycloid round hole at the center shall uplink Eccentric Roller Bearings arm, which cycloidal gear needle round and meshing phase, comprising a difference of the teeth meshing with the gearbox.

Size	X1	X2	X3	X4	X5	X6	X7	X8	X9
Size	B09	B0	B1	B2	B3	B4		B5	B6
Output Torque N.M
Speed Ratio	Input Speed 1500 rpm								1000 rpm
11	26	48.3	141.7	257.6	483.0	708.3	965.9	1787.0	2125.1
17	40	74.6	149.3	398.1	746.4	1094.7	1492.8	2761.8	3284.3
23	27	53.9	202.0	296.2	740.5	1481.8	1481.8	3736.5	3736.5
29	34	67.9	186.7	373.5	933.7	1867.4	1867.4	2546.5	4711.3
35	41	82	225.4	307.4	819.6	1536.7	2253.8	3673.4	5686.5
43	50	100.7	151.0	377.6	755.2	1384.5	1887.9	2768.9	3775.8
59			207.2	380.0	759.9	1381.5	1899.6	2590.4	3799.3
71			166.3	332.5	623.5	1246.9	1662.5	2286.0	4572.0
87				280.1	764.0	1120.5	2037.2	2037.2	7639.5

PRODUCT CHARACTERISTICSHigh Speed Ratio and High Efficiency
Single-stage transmission can achieve a deceleration ratio of 1:87, and the efficiency is over 90%. If multi-stage transmission, the deceleration ratio is larger.
Compact structure and small volume
Because the planetary transmission principle is adopted, the input shaft and the output shaft are on the same axis, so the structure is compact and the volume is small.
Smooth operation and low noise
Cycloidal pin teeth have many meshing teeth, large overlap coefficient and smooth mechanism, which limits vibration and noise to a minimum.
Reliable use and long service life
Because the main parts are bearing steel, high strength is obtained by quenching treatment (HRC58-62), Highly Efficient Helical Bevel Gear Speed Reducer AC Motor and rolling friction is used in some transmission contacts, which is durable and has long service life.
_{REDUCER SHAFT}New national standard shaft.Multi-precision machining, through strict dynamic and static balance test procedures, to ensure the reducer running low noise, balance smooth.THICKENING BASEThe box body is made of HT200 material,which is cleaned by professional screening and washing equipment to ensure that the inner cavity of the box body is cleaner without iron filings.
Cycloid wheelThe cycloid wheel hardened bearing steel,
high strength, long service life of the rolling friction contact parts adopt.
PROFESSIONAL AIR TIGHTNRSS TESTSemi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding MachinePET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.
Our Company HangZhou YINXIN ELECTROMECHANICAL EQUIPMENT SUPPLY STATIONOur company is located in the city of HangZhou, ZheJiang Province of China. We handle the products of power transmission, our lines mainly cover series products in speed reducers, gearboxes , associated electricial motors and other power transmission accessories. Based on the versatile functions, our products can be utilized in many fields: machines of waste water treatment, High torque long shaft dc planetary geared motor high torque 16mm 22mm 6v 7.2v 8v 9v 12v 24v 90rpm 100rpm 150rpm 200rpm 300rpm dredgers, chemical industry, cranes, metal working mills, conveyors, paper industry, cement industry, cableways and so on.With the excellent quality and reasonable price , our products enjoy a good reputation from customers and the peers all over the world. Furthermore, the R&D investment are annually increasing for the purpose of better meeting the new demands of our customers and adapting the new tendency of the industry.Depending on the principles of honestly operating and mutual benefit, We sincerely look forward to cooperating with you.
Application area Certifications Packing&Transportion Online Service FAQQ1: Are you a trading company or a manufacturer ?A: We are a manufacturer in ZheJiang Province, High Quality Worm Gear Speed Reducer Gearbox For Motor China. Our company owns the ability of manufacturing, processing,designing and R&D. We welcome your visit.
Q2: How we select models and specifications?A: According to the specific details of the demands from the part of enquiry, we will recommend the products’ models upon synthesizing the factors of field of products usage, power, torque arm and ratio…
Q3: How is your price? Can you offer any discount?A: Our prices are always competitive. If the customer can place a large order, we surely will allow discount.
Q4: How long should I wait for the feedback after I send the enquiry?A4: We will reply the enquiries without any delay, 12 hours at most.
Q5: What is your product warranty period?A: We have the certifications of ISO99001,CE, SGS.
Q6: What industries are your gearboxes being used?A: Our gearboxes are widely applied to metallurgical equipment, mining equipment, automation equipment, High quality HB rigid tooth flank gear units gearbox for cement plant food machinery, packaging equipment, tobacco equipment and so on.

Helical, Straight-Cut, and Spiral-Bevel Gears

If you are planning to use bevel gears in your machine, you need to understand the differences between Helical, Straight-cut, and Spiral bevel gears. This article will introduce you to these gears, as well as their applications. The article will also discuss the benefits and disadvantages of each type of bevel gear. Once you know the differences, you can choose the right gear for your machine. It is easy to learn about spiral bevel gears.
gear

Spiral bevel gear

Spiral bevel gears play a critical role in the aeronautical transmission system. Their failure can cause devastating accidents. Therefore, accurate detection and fault analysis are necessary for maximizing gear system efficiency. This article will discuss the role of computer aided tooth contact analysis in fault detection and meshing pinion position errors. You can use this method to detect problems in spiral bevel gears. Further, you will learn about its application in other transmission systems.
Spiral bevel gears are designed to mesh the gear teeth more slowly and appropriately. Compared to straight bevel gears, spiral bevel gears are less expensive to manufacture with CNC machining. Spiral bevel gears have a wide range of applications and can even be used to reduce the size of drive shafts and bearings. There are many advantages to spiral bevel gears, but most of them are low-cost.
This type of bevel gear has three basic elements: the pinion-gear pair, the load machine, and the output shaft. Each of these is in torsion. Torsional stiffness accounts for the elasticity of the system. Spiral bevel gears are ideal for applications requiring tight backlash monitoring and high-speed operations. CZPT precision machining and adjustable locknuts reduce backlash and allow for precise adjustments. This reduces maintenance and maximizes drive lifespan.
Spiral bevel gears are useful for both high-speed and low-speed applications. High-speed applications require spiral bevel gears for maximum efficiency and speed. They are also ideal for high-speed and high torque, as they can reduce rpm without affecting the vehicle’s speed. They are also great for transferring power between two shafts. Spiral bevel gears are widely used in automotive gears, construction equipment, and a variety of industrial applications.

Hypoid bevel gear

The Hypoid bevel gear is similar to the spiral bevel gear but differs in the shape of the teeth and pinion. The smallest ratio would result in the lowest gear reduction. A Hypoid bevel gear is very durable and efficient. It can be used in confined spaces and weighs less than an equivalent cylindrical gear. It is also a popular choice for high-torque applications. The Hypoid bevel gear is a good choice for applications requiring a high level of speed and torque.
The Hypoid bevel gear has multiple teeth that mesh with each other at the same time. Because of this, the gear transmits torque with very little noise. This allows it to transfer a higher torque with less noise. However, it must be noted that a Hypoid bevel gear is usually more expensive than a spiral bevel gear. The cost of a Hypoid bevel gear is higher, but its benefits make it a popular choice for some applications.
A Hypoid bevel gear can be made of several types. They may differ in the number of teeth and their spiral angles. In general, the smaller hypoid gear has a larger pinion than its counterpart. This means that the hypoid gear is more efficient and stronger than its bevel cousin. It can even be nearly silent if it is well lubricated. Once you’ve made the decision to get a Hypoid bevel gear, be sure to read up on its benefits.
Another common application for a Hypoid bevel gear is in automobiles. These gears are commonly used in the differential in automobiles and trucks. The torque transfer characteristics of the Hypoid gear system make it an excellent choice for many applications. In addition to maximizing efficiency, Hypoid gears also provide smoothness and efficiency. While some people may argue that a spiral bevel gear set is better, this is not an ideal solution for most automobile assemblies.
gear

Helical bevel gear

Compared to helical worm gears, helical bevel gears have a small, compact housing and are structurally optimized. They can be mounted in various ways and feature double chamber shaft seals. In addition, the diameter of the shaft and flange of a helical bevel gear is comparable to that of a worm gear. The gear box of a helical bevel gear unit can be as small as 1.6 inches, or as large as eight cubic feet.
The main characteristic of helical bevel gears is that the teeth on the driver gear are twisted to the left and the helical arc gears have a similar design. In addition to the backlash, the teeth of bevel gears are twisted in a clockwise and counterclockwise direction, depending on the number of helical bevels in the bevel. It is important to note that the tooth contact of a helical bevel gear will be reduced by about ten to twenty percent if there is no offset between the two gears.
In order to create a helical bevel gear, you need to first define the gear and shaft geometry. Once the geometry has been defined, you can proceed to add bosses and perforations. Then, specify the X-Y plane for both the gear and the shaft. Then, the cross section of the gear will be the basis for the solid created after revolution around the X-axis. This way, you can make sure that your gear will be compatible with the pinion.
The development of CNC machines and additive manufacturing processes has greatly simplified the manufacturing process for helical bevel gears. Today, it is possible to design an unlimited number of bevel gear geometry using high-tech machinery. By utilizing the kinematics of a CNC machine center, you can create an unlimited number of gears with the perfect geometry. In the process, you can make both helical bevel gears and spiral bevel gears.

Straight-cut bevel gear

A straight-cut bevel gear is the easiest to manufacture. The first method of manufacturing a straight bevel gear was to use a planer with an indexing head. Later, more efficient methods of manufacturing straight bevel gears were introduced, such as the Revacycle system and the Coniflex system. The latter method is used by CZPT. Here are some of the main benefits of using a straight-cut bevel gear.
A straight-cut bevel gear is defined by its teeth that intersect at the axis of the gear when extended. Straight-cut bevel gears are usually tapered in thickness, with the outer part being larger than the inner portion. Straight-cut bevel gears exhibit instantaneous lines of contact, and are best suited for low-speed, static-load applications. A common application for straight-cut bevel gears is in the differential systems of automobiles.
After being machined, straight-cut bevel gears undergo heat treatment. Case carburizing produces gears with surfaces of 60-63 Rc. Using this method, the pinion is 3 Rc harder than the gear to equalize wear. Flare hardening, flame hardening, and induction hardening methods are rarely used. Finish machining includes turning the outer and inner diameters and special machining processes.
The teeth of a straight-cut bevel gear experience impact and shock loading. Because the teeth of both gears come into contact abruptly, this leads to excessive noise and vibration. The latter limits the speed and power transmission capacity of the gear. On the other hand, a spiral-cut bevel gear experiences gradual but less-destructive loading. It can be used for high-speed applications, but it should be noted that a spiral-cut bevel gear is more complicated to manufacture.
gear

Spur-cut bevel gear

CZPT stocks bevel gears in spiral and straight tooth configurations, in a range of ratios from 1.5 to five. They are also highly remachinable except for the teeth. Spiral bevel gears have a low helix angle and excellent precision properties. CZPT stock bevel gears are manufactured using state-of-the-art technologies and know-how. Compared with spur-cut gears, these have a longer life span.
To determine the strength and durability of a spur-cut bevel gear, you can calculate its MA (mechanical advantage), surface durability (SD), and tooth number (Nb). These values will vary depending on the design and application environment. You can consult the corresponding guides, white papers, and technical specifications to find the best gear for your needs. In addition, CZPT offers a Supplier Discovery Platform that allows you to discover more than 500,000 suppliers.
Another type of spur gear is the double helical gear. It has both left-hand and right-hand helical teeth. This design balances thrust forces and provides extra gear shear area. Helical gears, on the other hand, feature spiral-cut teeth. While both types of gears may generate significant noise and vibration, helical gears are more efficient for high-speed applications. Spur-cut bevel gears may also cause similar effects.
In addition to diametral pitch, the addendum and dedendum have other important properties. The dedendum is the depth of the teeth below the pitch circle. This diameter is the key to determining the center distance between two spur gears. The radius of each pitch circle is equal to the entire depth of the spur gear. Spur gears often use the addendum and dedendum angles to describe the teeth.

China wholesaler Horizontal BWD cycloidal gear box Vertical BLD cycloidal pin wheel gearbox cycloid reducer with motor wholesaler

in Comilla Bangladesh sales price shop near me near me shop factory supplier Atg Factory Planetary Gear Box Reducer for Face Mask Machinery manufacturer best Cost Custom Cheap wholesaler

Our items are made by contemporary computerized machinery and tools. Advanced thermo remedy products, such as community warmth treatment oven, multi-use thermo therapy oven, and many others. EPG has established up a full set of quality management system which is presented with superior inspection and examination products. PGE Series

Goods Features:

(1) Lower Sounds:UnEPT65db.
(2) Minimal Backlash:Backlash is unEPT3 arcmin . Backlash for 2-phase pace reduction is with in 5 arcmin.
(3) Large Effectiveness:1-stage up to 95% or much more,2-stage up to 92% or much more.

(4) High Input Pace:Input pace makes it possible for for up to 8000RPM.

(5) Substantial Torque:Substantial torque output than that of traditional planetary EPT EPTs
(6) Routine maintenance-Totally free:Low grease dress in,can be lifetime lubrication
(7) High Speed Reduction Ratio:Speed ratio is above 1/1000.

Benefit:

Use:

Design ILLUMINATE:

Equipment BOX Functionality Info:

MODUL NO.		Stage	RATIO sup1	PGE42	PGE60	PGE90	PGE120	PGE160
Rated output torque T2N	Nm	1	three	fourteen	39	104	215	423
			4	twelve	31	eighty five	176	364
			five	14	39	104	215	423
			7	twelve	33	ninety one	195	358
			eight	ten	33	80	one hundred sixty	330
			ten	nine	28	75	210	320
			twelve	fourteen	39	104	215	423
			15	fourteen	39	104	215	423
			20	12	31	85	176	364
			twenty five	14	39	104	215	423
			thirty	–	–	104	215	423
			35	fourteen	39	104	215	423
			40	14	39	104	215	423
			fifty	–	–	104	215	423
			70	–	–	104	215	423
			one hundred	nine	28	seventy five	210	320
			3~a hundred	three instances of Nominal Output Torque
			three~one hundred	450	4,000	three,600	3,000	two,five hundred
			three~a hundred	800	6,000	6,000	four,800	three,600
EPT Backlash	arcmin	1	three~10	le8
EPT Backlash	arcmin	2	twelve~one hundred	le10	le10	le8	le8	le8
Torsional stiffness	Nm/arcmin	1,two	3~one hundred	one	2	seven	15	sixty six
Max.radial drive F2rB sup2	N	1,two	3~100	three hundred	680	1750	3080	6520
Max.radial drive F2rB sup2	N	one,two	three~a hundred	150	340	875	1540	3260
Service daily life	hr	1,2	3~one hundred	twenty,000*
Service daily life	hr	one	3~10	ge97
		two	twelve~a hundred	ge94
Bodyweight	kg	1	three~10	one	two	4	8	18
		two	twelve~100	1	2	5	eleven	25
Functioning temperature	ordmC	1,two	three~a hundred	-10 ordmC~ ninety ordmC
Lubrication		1,2	3~one hundred	Synthetic lubricating oil
Protection amount		1,two	three~one hundred	IP65
Protection amount		1,2	three~one hundred	Any path
Sounds stage(n1=3000rpm)	dB	one,2	three~a hundred	le68	le70	le72	le74	le75

Define DIMENSION:

Organization View:

HangEPT EPEPTn De Yi Electrical Co.,Ltd. is a subsidiary of EPTiwan Jun Yi EPTry. Jun Yi EPTry was started in March 1972. The business EPTizes in the layout, deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment and manufacturing of large-tech different EPTed motors and helical EPT EPTs, worm and worm EPT EPTs and planetary EPTs. Our goods sold to more than thirty countries around the planet and earn excellent reputation and quite a few awards in the overEPT industry for numerous a long time. In modern several years, to attain EPT creation and supply superb service,we set up subsidiary of creation of planetary EPT EPT in EPT.

History:

1972:EPTiwan Jun Yi EPTry is started.
1989:It estabEPTd a overEPT department business ATRUMP EPTRY INC in Los Angeles
1995:Pass the ISO9002 Commodity certification.
2003:Move the ISO9001 high quality certification and the European CE stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd take a look at which enabled the products to be bought in Europe
2013:The company set up subsidiary in EPT to achieve EPT production.

Manufacturing unit:

Knowledge Produced IN ATG,Knowledge THE EPT.

Gear:

INSPECTION Gear:

FAQ:

(1) Can I be your agent?

Sure, welcome to deep cooperation. We have large advertising of ATG brand in the marketplace now. For the information make sure you speak to me.

(2) Is OEM offered?

Of course, OEM is accessible. We have professional designer to help your brand promotion.

(3) How can I get a sample to check your top quality?

Right after price tag affirmation, you can call for for samples to examine our good quality. Free for the samples, but you require to spend for the freight.

(4)What’s your high quality assure?

We have distinct sorts of goods which can fulfill different top quality stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd.
Our QC section will test products prior to shipping and delivery. We have a hundred% top quality promise to consumers. We will be accountable for any top quality problem.

(5) How about the shipping and delivery time?

The supply time is relying on the goods and the amount. But EPTly, the delivery time for a container is about one particular thirty day period.

Welcome to our company.

If any difficulty, really feel free of charge to depart information on the base of this web page.

in Comilla Bangladesh sales price shop near me near me shop factory supplier Atg Factory Planetary Gear Box Reducer for Face Mask Machinery manufacturer best Cost Custom Cheap wholesaler